Pipe Beveling, Threading & Facing | RMT Pipe Spool Master Series ```
Loading...

RMT PIPE SPOOL MASTER SERIES

PRECISE AND POWERFUL, BEVEL THIN TO THICK, DRASTICALLY INCRERASE SHOP EFFICIENCY

Pipe Spool Master Series

Changing the Industry Forever

      The piping fabrication industry has been a backbone of American growth and infrastructure. Pipelines, oil, energy, medical, food and paper have all grown due to the work done by pipe fabricators across the country. It’s full of the grittiest and most talented welders in the world. However, the technology that exists in today’s pipe shop hasn’t changed much in decades.


      The capacity to put complex bevels on basic carbon pipe and even harder P91 Chrome Alloy pipe has traditionally been done on mills, tri-tools and plasma/oxy. They’re slow, burdensome and are usually the bottleneck of any shop pushing out any decent amount of pre-prepped pipe. When trying to complete a J or U bevel, the accuracy and quality lacks consistency using traditional methods.



New Blazing Fast Facing Speeds

     The RMT Pipe Spool Master Series of pipe facing lathes. Many shops, depending on equipment, will put out 1-4 larger diameter pipes a day with the machined bevel quality required; taking anywhere from 1-4 hours per pipe to set up and “machine” the end of the pipe. The new RMT Pipe Spool Master Series machines can knock that time down to 15-30 minutes including setup. The machine does not spin the pipe, but rather clamps and centers the material, while a facing head spins and approaches the material while inside the machine. 12” XH wall (1-1/2”) P91 pipe processed with a complex bevel including C-dimension was processed in 20 minutes. See video of the Pipe Spool Master in action


     Dramatically increase your shop’s capacity and output, giving you a huge advantage over your competitors and increasing your profitability; all while taking up minimal floor space and overhead.

PIPE SPOOL MASTER 8

  • 1-8” Capacity
  • ¼” Wall Max (one pass)
  • Manual machine
  • Simple Bevel
This compact beveling machine allows you to put any degree angled V bevels on your pipe or tube from sizes 1”-8” OD. Super efficient and easy to setup and use, the Pipe Spool Master 8 can save your shop hours of beveling time. It’s a necessity for any shop.

PIPE SPOOL MASTER 16

  • 3”-16” Capacity
  • 1/4” Wall Max (multiple passes)
  • Manual machine
  • Simple Bevel
The Pipe Spool Master 16 is a stout and flexible pipe beveling machine. Designed to put V bevels on pipe 3”-16” OD in various angles, such as your basic 30 and 37.5 degree. Super efficient and easy to setup and use, the Pipe Spool Master 16 will save your shop hours of beveling time. It’s a necessity for any shop.

PIPE SPOOL MASTER 32

  • 6”-32” Capacity
  • 4” Wall Max (multiple passes)
  • CNC Machine
  • Complex Bevels & Threading
The Pipe Spool Master 32 is the workhorse for any pipe fabrication shop. Designed to put complex bevels on your pipes 6”-32” within minutes. A superior finish over traditional methods and that your welders will love on wall thicknesses up to 3.9”. Your J, U & V bevels, including radiused bevels are now easily programmed and processed in minutes rather than hours. With the upgraded controller you can even thread the ends of your pipe or tubes. The Pipe Spool Master 32 is revolutionizing the pipe fab industry and will dramatically increase your shop’s efficiency and your company’s profitability.

PIPE SPOOL MASTER 40

  • 12”-40” Capacity
  • 4” Wall Max (multiple passes)
  • CNC Machine
  • Complex Bevels & Threading
The Pipe Spool Master 40 is the flagship of the Pipe Spool Master Series and is the workhorse for any pipe fabrication shop. Designed to process complex bevels in minutes on pipes from 16”-40” and wall thicknesses up to 3.9”. Your J, U & V bevels, including radiused bevels are now easily programmed and processed in minutes rather than hours. With the upgraded controller you can even thread the ends of your pipe or tubes. The Pipe Spool Master Series machines are revolutionizing the pipe fab industry and will increase your shop’s efficiencies and your company’s profitability.

PIPE SPOOL MASTER 60

  • 16”-60” Capacity
  • 4” Wall Max (multiple passes)
  • CNC Machine
  • Complex Bevels & Threading
The Pipe Spool Master 60 gives you as a pipe fabricator, a BIG advantage over your competition. The ability to process complex pipe bevels on 16”-60” material in minutes gives you vaste flexibility and the ability to chase a variety of markets and customers. Your J, U & V bevels, including radiused bevels are now easily programmed and processed in minutes rather than hours. With the upgraded controller you can even thread the ends of your pipe or tubes. The Pipe Spool Master Series machines are revolutionizing the pipe fab industry and will increase your shop’s efficiencies and your company’s profitability.

PIPE SPOOL MASTER 80

  • 32”-80” Capacity
  • 4” Wall Max (multiple passes)
  • CNC Machine
  • Complex Bevels & Threading
The Pipe Spool Master 80 give you a GIANT leg up on your competition in the pipe fabrication industry. The ability to process complex pipe bevels on 32”-80” material in minutes allows you flexibility to chase a variety of niche markets and customers. Your J, U & V bevels, including C-dimension and radiused bevels, are now easily programmed and processed in minutes rather than hours. With the upgraded controller you can even thread your pipe or tubes. The Pipe Spool Master Series of machines are revolutionizing the pipe fab industry and will increase both your shop’s efficiencies and your company’s profits.

HOW PIPE SPOOL MASTER WORKS?

PIPE SPOOL MASTER FEATURES

RMT Angle Roll Bevel type guide: Plain Bevel, J-Prep Bevel, J-Prep with back bevel, Compund bevel, Compound-J-prep with back bevel

Take the Time & Guesswork out of Beveling

It’s all about time! The Pipe Spool Master Series of machines are revolutionizing the pipe fabrication industry. Designed to dramatically cut down your shop’s beveling time; a complex J or U bevels that took hours to put on pipe can now be done in minutes. The Pipe Spool Master Series of machines is built out of strong stress relieved material. A sturdy frame that takes up a small footprint in your shop. Increasing both efficiencies and profitability! Is your company ready to grow?


Bevel Efficiently

Standard practices of using a tri-tool or boring mill are about to dramatically change. The PIPE SPOOL MASTER Series of machines can put complex bevels, such as J, U, and V profiles, including C dimensions and difficult radiused bevels on your critical pipe ends in minutes. With the conversational controller, the Pipe Spool Master can be programmed and profiling in minutes. Even your hard to process and expensive materials are no problem for the Pipe Spool Master. By no longer needing to plasma cut pipe you can also cut down on scrap.

RMT Angle Rolls Machining productivity comparing manual mode vs auto

RMT Angle Roll beveled & finished product. Smooth and burless, ready for production surface

Bevel Accurately

Precision and finish your welders will love. The Pipe Spool Master may be fast, but it’s also accurate. Critical C Dimensions and landings are important in making sure your prefinished pipe is easily installed in the field. Don’t cost yourself more time and money by sending out inaccurate pipe. The Pipe Spool Master’s accuracy and control allows you to insure your own quality.

Bevel Safely

Safety is RMT’s primary concern, and safety is built into the Pipe Spool Master Series machines. With multiple E-Stops and the encased cutting head you can be sure that your operator will be happy and safe while he goes throughout his day. RMT will train and support your shop on how to not only program and run the Pipe Spool Master, but also the do’s and don’ts of the machine.

RMT Pipe Spool Masters clean shavings after a machine run.

PIPE SPOOL MASTER SERIES GALLERY

RMT Pipe Spool Master 8 Machine used for beveling, facing, and threading pipe | Designed and engineered in USA
RMT (Revolution Machine Tools) Pipe Spool Master 16 for beveling, facing, and threading pipe
RMT Pipe Spool Master 40 Beveling, Threading, and Facing Machine | Designed and engineered in the USA
Pipe professionally faced and beveled on the RMT Pipe Spool Master 60 Machine.
Large Pipe professionally faced and beveled on the RMT Pipe Spool Master 80 Machine.
Pipe professionally faced and beveled on the large RMT Pipe Master Machine.
RMT Pipe Spool Master Roll Table being used to quickly place pipes cut from saw into position for facing, beveling & threading.
RMT close up view of carbide cutting tip used for the beveling, threading & facing process
RMT Faced & Beveled pipe ready for production.
RMT Faced & Beveled pipe with a clean smooth surface, weld ready
RMT Pipe Spool Master performing a bevel cut
RMT Pipe Spool Master close view of pipe threaded to perfection
RMT Pipe Threaded on the Pipe Spool Master Machine
RMT Pipe Master Threaded Pipe Finished view
An array of finished pipe bevels, facing & threading machined by the Pipe Spool Master Machine
RMT Pipe Spool Master Machine being ran and operated by newly trained employee
Large Pipe being positioned on crane to be machined on the RMT Pipe Spool Master 60
RMT Pipe Spool Master 60 performing a pipe bevel while remaining hoisted by crane for quick removal
Large Pipe Spool Master with automated loading system displayed
Short Pipe with a bend being faced & beveled on the RMT Pipe Spool Master Machine
RMT Pipe Spool Master and CEO Kyle Jorgenson displaying machine
RMT Pipe Spool Master dislay without pipe loaded
RMT Spool Master Machine being operated by Colton a trained expert on the operation panel

videos





FIND US

CALL US TOLL FREE
844.RMT.INFO
844.768.4636
ADDRESS
385 N 700 W
North Salt Lake, UT 84054
USA
LET US HELP!